1.测量确认尺寸：在开始制作之前，需要先确保长廊的尺寸，包括长度、宽度、高度等，可以用卡尺进行测量。同时，需要考虑到长廊的售价、定制等等因素。

1. Measurement to confirm dimensions: Before starting production, it is necessary to ensure the dimensions of the corridor, including length, width, height, etc., which can be measured using calipers. At the same time, it is necessary to consider factors such as the price and customization of the corridor.

2.制作木质设计拼装件：仿木长廊中还需要一些木质设计拼装件，这些件的数量和大小要根据长廊的实际长度进行确定，通常需要使用锤子、斧头、手锯等工具进行加工。

2. Making wooden design assembly parts: In the imitation wood corridor, some wooden design assembly parts are also needed, and the quantity and size of these parts need to be determined based on the actual length of the corridor. Usually, tools such as hammers, axes, and hand saws are needed for processing.

3.安装铝合金连接件：将铝合金连接件按照三角形的布局形式安装在地面上，确保其已经卡在地面，然后将其分解成两个三角形组件，再使用螺钉将其固定在地面上部分。

3. Install aluminum alloy connectors: Install the aluminum alloy connectors on the ground in a triangular layout, ensuring that they are already stuck in the center of the ground. Then, decompose them into two triangular components and fix them to the ground using screws.

4.安装仿木板：安装仿木板需要按照一定的尺寸和顺序进行。，在その1的铝合金下部安装仿木板，然后通过诸如角码、螺钉、等工具将其连接到三角形铝合金连接件上。当连接件与仿木板准备好时，需要确保其牢固性及其与邻近板的及时连接。

4. Installing imitation wooden boards: Installing imitation wooden boards requires following a certain size and sequence. Firstly, install a simulated wooden board under the aluminum alloy of そ 1, and then connect it to the triangular aluminum alloy connector using tools such as corner codes, screws, etc. When the connectors and imitation wooden boards are ready, it is necessary to ensure their firmness and timely connection with adjacent boards.

5.设置屋顶：从外向内，设置屋顶，因为数据材料仿木板的成分制作出来的屋顶是非常精致，并能保护墙壁。然后，需要在屋顶的中部安装仿木板，并使用角码将其固定到豁口附近所处的铝合金板材上。

5. Setting the roof: From the outside in, set the roof because the roof made of data materials imitating the composition of wooden boards is very exquisite and can protect the walls. Then, it is necessary to install imitation wooden boards in the middle of the roof and fix them to the aluminum alloy sheet near the opening using corner codes.