仿木树桩石如何正确施工呢？_常见问题_新闻资讯-济南鑫路通新型建材有限公司

项目分类Project classification

资讯Information

联系我们Information

济南鑫路通新型建材有限公司
地址：济南市章丘区枣园街道办事处吉祥工业园

仿木树桩石如何正确施工呢？

来源：http://www.jnxltjc.com/ 日期：2023-04-12 发布人：admin

仿木树桩石是一种新型的建筑材料，其外观类似于现成的树桩，但是由于采用了特殊的材料和工艺制作，其重量轻、强度高、防水、防腐，寿命较长，适用于公园、景区、游乐场等地的园林绿化。下面是山东仿木树桩石的施工步骤：

Imitation wood tree stump stone is a new type of building material that resembles ready-made tree stumps in appearance. However, due to the use of special materials and processes, it is lightweight, high-strength, waterproof, anti-corrosion, and has a longer lifespan. It is suitable for landscaping in parks, scenic spots, amusement parks, and other places. The following are the construction steps for Shandong imitation wood tree pile stones:

1.地基施工：将施工区域清理干净，挖出深度和直径与仿木树桩石相匹配的坑。然后在坑里铺设一层混凝土，厚度应该为10-15cm，等待其初步凝固。

1. Foundation construction: Clean the construction area and excavate pits with depths and diameters that match the simulated wood tree piles and stones. Then lay a layer of concrete in the pit, with a thickness of 10-15cm, and wait for its initial solidification.

2.安装底座：将调整好大小的仿木树桩石底座放入混凝土中，并在底座上铺设一层沙子，以平整仿木树桩石。

2. Installation of base: Place the adjusted sized imitation wood tree pile stone base into concrete and lay a layer of sand on the base to level the imitation wood tree pile stone.

3.安装仿木树桩石：将仿木树桩石放置于底座上，调整好位置和水平度，然后开始进行固定。

3. Install the imitation wood tree pile stone: Place the imitation wood tree pile stone on the base, adjust the position and levelness, and then start fixing.

4.固定仿木树桩石：采用U型钢钉或膨胀螺栓固定仿木树桩石，使其稳定在底座上。

4. Fixed imitation wood tree pile stone: Use U-shaped steel nails or expansion bolts to fix the imitation wood tree pile stone to stabilize it on the base.

5.安装防水层：在仿木树桩石表面涂刷防水层，以防止水分侵入仿木树桩石内部，影响它的使用寿命。

5. Installation of waterproof layer: Apply a waterproof layer on the surface of the imitation wood tree stump to prevent water from entering the interior of the imitation wood tree stump and affecting its service life.
山东仿木树桩石

6.补偿缝：在仿木树桩石相邻位置的缝隙处填充聚氨脂发泡材料，以均匀分担于仿木树桩石的力量。

6. Compensation joint: Fill the gap adjacent to the imitation wood tree stump with polyurethane foam material to evenly share the force on the imitation wood tree stump.

7.换色处理：仿木树桩石表面可以进行换色处理，以增加其视觉效果。

7. Color change treatment: The surface of the imitation wood tree stump stone can be color changed to increase its visual effect.

8.毛坯验收：当仿木树桩石全部安装完成后，进行毛坯验收，检查是否符合要求。

8. Rough acceptance: After all the imitation wood tree piles and stones are installed, the rough acceptance is carried out to check whether they meet the requirements.

9.竣工验收：等待仿木树桩石彻底固定后，进行竣工验收。

9. Completion acceptance: Wait for the imitation wood tree piles and stones to be completely fixed before proceeding with the completion acceptance.

需要注意的是，仿木树桩石施工过程中，应该严格遵守安装要求，做好防水措施，确保仿木树桩石的使用寿命和视觉效果。您有需求可以随时来我们网站http://www.jnxltjc.com进行咨询了解！

It should be noted that during the construction process of imitation wood tree pile stones, installation requirements should be strictly followed, waterproof measures should be taken to ensure the service life and visual effect of imitation wood tree pile stones. You can come to our website anytime if you have any needs http://www.jnxltjc.com Conduct consultation to understand!

Related products相关新闻